Sunday, April 17, 2011

Introduction to Fluke Fishing

If you've ever fished for flounder, no doubt you've discovered that these flat fish with lots of teeth have an attitude that is well known. These fish are masters of camouflage and they are as quick as lightening. There are very few east coast fish that are as sought after as the summer flounder. The imagine for this is two-fold - first, they fight like mad and second their tasty while fillets are pleasing to nearly any palate.

Summer flounder start to appear on the shorelines of the northeast ordinarily sometime in May. Warmer water means they will result their food (squid, sand eels and other bait fish) into bays, tidal river mouths and shallow beach waters. During the warmest days of summer, flounder can be found as close to thirty feet to as many as one hundred and twenty feet from shore. This allows them to lurk in the water that has a temperature they are comfortable in. This means that fall weather will find the close to shore as they are in late spring. During late fall the fluke will again migrate back to the deeper waters of the Atlantic so they can find warmer water to live out the Northeast winter.

Flounder

Fishing for fluke takes some discrete approaches dictated by where you're fishing. Let's first discuss shallow water fishing which is preferable early and late in the season. Depending on your location you may want to start in twenty feet or less of water, near the beach. The ideal tackle for these conditions can be whether a conventional or spinning rod. Jigs in the one to four ounce range are ordinarily best and can be tipped with squid. You should deploy your jigs straight down from the side of your drifting boat. Make sure that your jig is heavy enough that your line stays vertical. This will ensure that the line is in palpate with the water bed where the fluke are most likely to be located. If the jig is too light chances are that it will lose not come close enough to the lowest to allow a prosperous fishing expedition.

Work your jig by raising and lowering it as the boat drifts. The rule of thumb is one to two feet from the bottom. Do this by lifting your rod tip and try to not raise it more than two feet. When lowering the jig back to the bottom, do so slowly. The other selection of policy if you're dealing with slightly lethargic fish is the snap method. This is authentically quite uncomplicated to do - once your line hits bottom, snap it back fast and allow it to fall slack. This ordinarily will grab the concentration of a lazy fluke.

After hooking and landing the fluke make sure you find a way to pinpoint your location - whether via Gps or triangulation. Chances are that there are more fluke in that location and repositioning your boat will allow you to make the same pass. This is when a Gps becomes invaluable.

As the season progresses the water near the shore becomes too warm for fluke. This is when you'll want to gallivant out to areas that are forty to one hundred twenty feet. Target fishing will be the most useful to you at these depths. Most fluke rigs are now spinner rigs - they are the most common. Your local bait and tackle shop will likely carry a variety of fluke spinner rigs. Experiment until you find which one you prefer and then you can begin designing your own based on your private preferences and success.

A spinner rig consists of three eyes - the first connects to the main line, the second for connecting a sinker and ultimately the last eye holds a leader. To get the most out of your spinner rig, place a series of colored beads and spinner blade just above your hook. Add your favorite bait to your hook and use a large enough sinker to ensure that you will be in palpate with the lowest of the water bed and still have a vertical line. As your boat drifts, the spinner rig will originate vibrations and a optic queue to get the concentration of the fluke. This is caused when your boat is drifting with the current and the spinner blade is rotating ahead of your hook.

Using a aggregate of techniques for shallow water jigging can help you catch more fluke than you could hope for. The deeper water spinner rigs ensure that even as they move out to cooler waters, you'll still be able to fast and authentically find some of the best tasting fish you can catch. Tipping your spinner rigs and jigs with squid strips helps you be more prosperous and it's effortlessly available in most bait shops.

Introduction to Fluke Fishing

Friends Link : Motorcycle Store video games Store

No comments:

Post a Comment